Wave RT9 Powershelf Spécifications Page 8
- Page / 44
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
RT9 Powershelf Rectifier Technologies
158-1806-01.doc
8 2-Mar-06
3. Installation
3.1 Mounting the Powershelf
The Powershelf is mounted into a standard 19” rack using M5 or M6 screws and cage
nuts. For systems larger than 4U (rack units) in height, multiple standard Powershelf
magazines are strapped together by four of 18x63mm strapping plates – two at the rear
that must remain in place, and two on the front that can be removed once the shelf is
secured in the rack. A minimum of 4 screws are required to secure the Powershelf into the
rack.
It is recommended to initially install the Powershelf into the rack without either the
MiniCSU-3 or the RT9 rectifiers in place.
M5 or M6 mounting screws
Figure 3.1 Mount points for securing Powershelf in a rack
Wiring for the standard Powershelf is rear access only
. For systems where rear access is
not available, the Powershelf can be pre-wired for load, battery, AC power and remote
communications before mounting the magazine in the rack. For maintenance and load
expansion, the Powershelf is slid forward until the rear top cover is able to be opened to
access the wiring points with suitably insulated tools.
3.1.1 Tools Required for Installation
• No. 2 Posi-drive screwdriver (for tightening rack bolts)
• No. 1 Posi-drive screwdriver
• 10mm open-ended spanner or socket (insulated for live DC work)
• 4mm Hex-bar driver (insulated for live DC work)
• 5mm flat-blade screwdriver (for tightening DIN rail terminal screws)
- ACN 058 107 707 1
- Table of Contents 2
- 158-1806-01.doc 3 2-Mar-06 3
- 1. General Warnings 4
- 2. Configuration 5
- 6 2-Mar-06 6
- 1 2 4 5 6 7 8 3 7
- 3. Installation 8
- 9 2-Mar-06 9
- 10 2-Mar-06 10
- 11 2-Mar-06 11
- 12 2-Mar-06 12
- 13 2-Mar-06 13
- 14 2-Mar-06 14
- 15 2-Mar-06 15
- 16 2-Mar-06 16
- 17 2-Mar-06 17
- 18 2-Mar-06 18
- 19 2-Mar-06 19
- 20 2-Mar-06 20
- 158-1806-01.doc 21
- 2-Mar-06 21
- 22 2-Mar-06 22
- 4. Commissioning 23
- 5. Operation 24
- 104A 54.5V 25
- 26 2-Mar-06 26
- 5.2.3 MiniCSU-3 Alarms 27
- Alarm Name Comments LED 27
- (User to complete) 28
- 29 2-Mar-06 29
- (Base Menu continued) 30
- 32 2-Mar-06 32
- 33 2-Mar-06 33
- 34 2-Mar-06 34
- 6. Troubleshooting 35
- 36 2-Mar-06 36
- 37 2-Mar-06 37
- 38 2-Mar-06 38
- 39 2-Mar-06 39
- 40 2-Mar-06 40
- 41 2-Mar-06 41
- 42 2-Mar-06 42
- 43 2-Mar-06 43
- 8. Specifications 44
Produits connexes et manuels pour Alimentations sans interruption (UPS) Wave RT9 Powershelf
(6 pages)Panasonic TH-42PH30U manuels
Manuels d'utilisation et guides de l'utilisateur pour Non Panasonic TH-42PH30U.
Nous fournissons des manuels en pdf 1 Panasonic TH-42PH30U à télécharger gratuitement par type de document : Dessins et schémas
Commentaires sur ces manuels